If You Desire Heart Pounding Horsepower with an Adrenaline Rush, This is the Cobra For You!
Absolutely Gorgeous Lazer Red Metallic Tri-Coat Exterior.
Powered by a 427ci Engine.
Professionally Built to Authenticate the Original 427 SC Cobra!
Offered At
SOLD
Condition
Click on the Play Button for An Exciting Video!
Turn Up the Volume for an Adrenaline Rush As You Hear the ROAR of the 427!
The E.R.A. 427SC is a Visual Clone of the Original 1960s' Roadster. ERA’s Specialty is getting all the small details just right, from the configuration of the competition jack pads to the exposed roll bar.
ERA’s body shape IS Indistinguishable from the Original, and the relationship of the tires to the body is correct, unlike many other "replicas" whose suspension's relationship to the body just doesn't look right. And by the way, we've been Voted the "Best Replica " at the world's most prestigious event – the annual S.A.A.C meet - almost every year since we started building kits!
Run on a Dyno Produces over 500 Horsepower!
Basic 427 SC Kit Prices start at $19,900. This ERA is Optioned as Follows:
427 Center Oilier Engine; $15,000:
Steel Crank Shaft.
Lemans Rods.
Iron Head.
Cobra Jet Intank.
Crowler Solid Lifter Camshaft.
FE Series Brass Expansion Tank; $450.00.
MSD Ignition.
Air Cleaner.
Cold Air Box; $250.00.
S&H Type 8-1/2" Air Cleaner; $70.00.
Trunk Mounted Battery with Shut Off; $500.00.
Heavy Duty Radiator Fan; $250.00.
Oil Cooler; $500.00.
Remote Oil Filler System; $300.00.
Transmission:
Top Loader Transmission (rebuilt); $1,300.00.
Shift Linkage with rods, handle and knob; $450.00.
Clutch Assembly; starting at $335.00.
Driveshaft; starting at $350.00.
Suspension:
Rear Suspension Jaguar based; $4,500.00.
Front Suspension GM based; $190.00.
Coil-Over Dampers and Springs; $700.00.
Rack and Pinion Steering; $400.00.
Anti-Sway Bar; $250.00.
Exhaust:
Side Pipe Complete System, Bare Steel; $850.00.
Head Shields; $100.00.
Wheels
6-Pin Hub System; $2,600.00.
Halibrand Knock-Off Wheels and Wing Nuts; $2,000.00+
Body & Interior:
Bumpers Chromed Steel; $200.00.
Emblems: Nose, Tail & Sides; $20.00EA.
Hood Scoop Molden On; $150.00.
Roll Bar Chromed; $235.00.
Installation; $100.00.
Wind Wings; $135.00.
Tonneau Cover Kit; $350.00.
Labor to Install; $700.00.
Leather Interior; $600.00.
Seat Tracks; $200.00.
SC Dash with Glove Box; $200.00.
Dashboard: SC with Special Fluted; $25.00.
Smiths Gauges Starting at; $600.00.
Emergency Brake Handle Chromed; $250.00.
Cable for Above Jaguar Based Rear; $50.00.
Heater-Defroster with Defroster Ducting; $390.00.
Wiper Motor Assembly; $350.00.
Stainless Steel Wiper Arms; $80.00.
Steering Column and Wheel Hub Custom ERA; $450.00.
Emblems: Steering Wheel Center Cap "AC" "Cobra"; $160.00
Sun Visors; $135.00.
**Wool Blend Carpet; $800.00.
Trunk Carpeting; $240.00.
Custom Made Seat Belts with Shoulder Harness; $250.00.
Body Prep & Paint; $6,900.00.
Laser Red Metallic; $2,900.00.
Smooth Out Rough Fiberglass Corners; $1,000.00.
Computerized 4 Wheel Alignment; $199.00.
Labor to Assemble at $89.00/hr; $10,680.00.
**No Longer Offered.
Replacement Cost Today $84,900.00! Special Price!
Prestige Motor Car Co. We are proud to be The Only Factory Autherized Dealer of ERA Replica Automobiles. An Award Winning Union: E.R.A. the Premier Builder, credited as being the Top Cobra Replica Manufacturer building faithful recreations of the 427 & 289FIA Models and Prestige Motor Car Co. National Award Winning Restorations, Selling and Servicing High-Quality Exotics, Muscle Cars, Corvettes & Specialty Cars Since 1979!
Designed to look exactly like the original car, ERA has duplicated the outside shape, interior details and even the look of the engine compartment, but without many of the original Shelby's shortcomings.
An ERA Replica has a stronger chassis, improved body mounting and material, and a thoroughly REFINED suspension to MAKE the ERA Cobra Replica a Better Street Car.
Unique to E.R.A., the use of a sub-frame isolates the differential noise and vibration from the chassis, allows the use of trailing arms to locate the lower control arms as originally designed. Without trailing arms, the lower control arms are put into bending modes that they were never designed for, allowing excessive toe change with power and braking forces. Don’t be fooled by competitors with optional systems that only partially compensates for this.
E.R.A’s Bonded body to chassis results in a stiffer overall structure, with no rattles, creaks or shakes. The fiberglass body simply does not get stress cracks, even after many hard miles on the road. The process is a bit more work, but well worth it! Some claim that their body is "unstressed" because it is rubber mounted to the chassis. Wrong! The outside shell must still be supported with inner panels or some other structure. The effectiveness, thoroughness and method of that connection is what determines whether stress cracks appear.
If your Zest is To Own What is Undeniably The Finest Cobra Built by The Best Using Premium Components Only, This Cobra Smokes the Competition!
The Quality, Craftsmanship, Drive and Best Yet, the Price are Unparalleled!
PRESTIGE MOTOR CAR CO. Sales, Service, AWARD Winning Restorations & Accessories Trusted Since 1979
Each Vehicle Offered For Sale At PRESTIGE MOTOR CAR CO. Has Been Personally Selected, Thoroughly Inspected and Completely Serviced By Our Trained Technicians. Each Vehicle Must Meet Our High Standards To Exceed Your Expectations!
We Stand Behind What We Sell! Visit Our Website at www.prestigemotorcar.com Go to the Testimonials link Hear What Our Customers Have to Say About Us! We Accept Take Trade-Ins! We Buy Cars! Financing Available. Worldwide Shipping. (518) 373-1403 Email Sales@prestigemotorcar.com *All Prices are Subject to Change*
Contact Address
Prestige Motor Car Co. 1660 Route 9 Clifton Park, NY 12065 Phone: 518-373-1403 Fax: 518-383-8312
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
